Wall, Brick & Block Applications include sealing stone, porous concrete, brickwork and masonry. Bulldog Seal may also be used to seal cracks in wall surfaces.
Instructions For Use
Remove old paint and loose material with a wire brush. Remove dust by brushing with a wet paintbrush.
Small cracks (<2mm) may simply be painted over (dampen brush afterwards with clean water and use this to smooth the surface if required).
Large cracks (>2mm): Mix Bulldog Seal with clean fine plaster sand to form a stiff paste. Fill cracks using a flat-ended scraper. Allow to dry for two hours. Over-coat with normal Bulldog Seal compound.
Sealing stone, porous concrete, brickwork and masonry:
1. Remove old waterproofing.
2. Clean surfaces with a wire brush. Using a hose pipe, spray wall with clean water.
3. Dilute Bulldog Seal 50:50 with water and apply as a primer.
4. Allow to become touch-dry.
5. Paint one coat of Bulldog Seal at 1 litre per square metre.
6. When dry, it may be over-coated with normal wall finishes, although it is not necessary.
Enquire About Applications
Enquire About Applications